Selecting the Default Typemock Isolator Template
Follow this procedure only if you want to use the
default Typemock Isolator template. If you want to customize an existing
template, follow the steps described in Selecting the Default
Typemock Isolator Template..
Typemock Isolator integrates with the build process using one of the following ways:
•Per team project collection
•Per team project or branch
Integrating Typemock Isolator per Team Project Collection
This strategy integrates Typemock Isolator for all builds in a team project collection. Use this strategy when all projects in the collection will use the same version of Typemock Isolator.
With this strategy, all of the Typemock Isolator files are loaded and deployed on the build controller level.
To integrate Typemock Isolator per team project collection:
1. In Team Explorer, right click on your build definition.
2. Select Edit Build Definition.
The Edit Build definition window is displayed.
3. Select Process.
4. In the Build process template area, select DefaultTemplate.12.1.WithTypemock.xaml.
5. Scroll down to the bottom of the Build process parameters list to the Typemock properties.
6. Verify that the Binaries Directory field does not contain any value.
7. Paste the location of the build.
8. Provide the license details.
9. From the AutoDeploy folder, copy all the files to the TypemockActivities folder.
Integrating Typemock Isolator per Team Project or Branch
This strategy integrates Typemock with a MS Team Foundation team project or a branch. Choose this strategy when more than one Typemock version exists in the collection.
With this strategy, only the base activity files are loaded on the build controller level, and the version-specific Isolator files loaded from Binaries Directory during the build.
To integrate Typemock Isolator per team project or branch:
1. In Team Explorer, right click on your build definition.
2. Select Edit Build Definition.
The Edit Build definition window is displayed.
3. Select Process.
4. In the Build process template area, select DefaultTemplate.12.1.WithTypemock.xaml.
5. In Source Control Explorer, navigate to the location of the build.
6. From the Source location field, copy the location.
7. Scroll down to the bottom of the Build process parameters list to the Typemock properties.
8. Verify that the Binaries Directory field does not contain any value.
9. Paste the location of the build.
10. Provide in the license details.